Linak DESKLINE DL12 User Manual page 18

The DB14 gives the possibility of synchronous drive of the middle profile - to make sure that the profiles are in the
right place, you have to secure that both the hollow and the massive spindles are driven in the bottom position. For
detailed information on how to mount the DB14, please contact LINAK A/S.
From the factory, the DB14 is delivered with the hollow spindle driven into end position. Please observe that the solid
spindle may roll out during transportation/handling, but it must be rolled back to end position before mounting in the
profile.
As the desktop amplifies the sound,we advise you to place a vibration/shock absorbing material between the desktop
and the desk frame
Do not drive the DB14 to the outer end position before mounting. This will result in damaging the DB.
Example of how to mount the DESKLINE system
®
Page 18 of 36