Description Of The Deskline ® System - Linak DESKLINE DL12 User Manual

Description of the DESKLINE system
®
Each DESKLINE actuator/column is equipped with a motor and parallel/memory drive is ensured by means of software in the
®
CBD4/CBD5/CBD6 that also takes account of an oblique load on the desk. Soft start and stop are also part of this software,
which ensures a soft start and stop when adjusting the desk.
Application of the DESKLINE system:
®
Irrespective of the load, the duty cycle 10% ~ 6 min./ hour or max. 2 min. at continuous use stated in the data sheets,
must NOT be exceeded as this will result in a superheating of the motor and the control box. Exceeding the duty cycle will
result in a dramatic reduction of the life of the system.
The DB/DL system range contains following products:
• 1 control box CBD4/CBD5/CBD6
• DL12, DL14, DB14 or DL17 (1 - 4)
• 1 exchangeable mains cable
• motor cables (1 - 4)
• 1 DP1U/DPF1M (if memory function is required) DP1C//DPT/DPF1C (if memory function and display are required) or
1 DPA/DPB/DP1K/DP1V/DPFK (if only up/down is required) or DPF1D (if display is required)
Page 10 of 36