RadioLink AT10II Instruction Manual page 4

Basic Menu (Model type of Multirotor as example)
Parameter Menu
LANGUAGE: Operating language can be set as preferred.
1
STK-MODE: Besides the mechanical changes position of throttle-stick spring
2
retainer, stick mode should also be changed here.
RF-MODE: The green LED indicator will become solid when RF Mode is
3
activated.
BACKLIGHT: Press Push and rotate the DIAL to brighten up or darken the
4
screen with range of 0 to 20.
USER NAME: User name can be personalized by rotating the DIAL and
5
press Push to select letters and numbers.
ALARM: Voltage alarm of transmitter, receiver and model battery can be
6
customized.Transmitter(TX):8.6V by default; Receiver(RX): 4.0V by default;
Model(EXT): 11.1V by default.
LockScreen: The screen will be automatically locked if it's without operation
7
for a certain period of time, which can be personalized.
Sound: The audible sound can be set ON or OFF.
8
Firmware
Firmware version can also be checked at the bottom of the PARAMETER menu. The
numbers behind Versions represents the current firmware of the AT10II.
Latest firmware is always available at
Alarming
THR POSITION!
The alarm of TH-DOWN is ON by default, If the throttle channel is not at the bottom
position when AT10II is switched on, there would be message of ****WARNING!!!****
www.radiolink.com
3
RadioLink Electronic Limited
www.radiolink.com
.