Transferring Tracks To A Mobile Phone; Transferring Tracks To A Psp - Sony Giga Juke NAS-50HDE Operating Instructions Manual

Note
If the AC power adaptor is supplied with the
connected device, it is recommended that you
operate the device on house current. When
operating the device on batteries, make sure the
remaining battery power is sufficient. We do not
guarantee against malfunctions, transfer failures,
or destruction of audio data caused by shortages in
battery power.

Transferring tracks to a mobile phone

1
Connect the mobile phone to the USB
connecting jack on the unit.
2
Set the connected mobile phone to
the USB connection mode.
Refer to the operating manual of
your mobile phone for the respective
procedure.
3
Enter the Function menu and select
[HDD JUKEBOX].
Make sure the TRANSFER button is set
to mobile phone (page 49).
4
Select the album, playlist, or tracks
that you want to transfer.
5
Press TRANSFER on the remote
control or the unit.
6
If the drive selection display appears,
select the drive.
If the connected mobile phone has only
one drive, the drive selection display
does not appear.
7
Make sure the selected tracks are
checked
Uncheck the tracks that you do not
want to transfer.

GB
.
8
Select [Setting].
9
Select [Select folder at destination],
and then select the destination folder
from the pull-down menu.
Standard Tracks are saved to "\\Music"

setting folder.
Root Tracks are saved to the root
setting directory of the destination.
Select Enter the folder name when
you change the destination
folder.
( Factory setting)

10
Select [Close].
11
Select [Execute] or press TRANSFER.

Transferring tracks to a PSP

1
Connect the PSP to the USB
connecting jack on the unit.
2
Set the connected PSP to the USB
connecting mode.
Refer to the PSP operating manual for
the respective procedure.
3
Enter the Function menu and select
[HDD JUKEBOX].
Make sure the TRANSFER button is set
to PSP (page 49).
4
Select the playlists or tracks that you
want to transfer.
5
Press TRANSFER on the remote
control or the unit.