Listening To Music Of A Bluetooth Mobile Phone Or Bluetooth Device - Sony CMT-U1BT Operating Instructions Manual

Listening to music of a
BLUETOOTH mobile phone
or BLUETOOTH device
Th is is a Micro HI-FI Component System
incorporating BLUETOOTH wireless
technology for enabling you to listen to music
from your BLUETOOTH mobile phone
or BLUETOOTH device over a wireless
connection.
Th is system supports the A2DP and AVRCP
profi les. For details on BLUETOOTH wireless
technology, see "BLUETOOTH wireless
technology" (page 31).
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
<http://www.sony.ca/ElectronicsSupport/>
Follow the procedure below to listen to music
from BLUETOOTH devices with this system.
Pairing this system with a BLUETOOTH
device
Connecting to registered devices
Playing music of a BLUETOOTH device
For details about the operations of the
BLUETOOTH device, also refer to the
operation manual supplied with your
BLUETOOTH device.
GB
14
CMT-U1BT.GB.2-683-494-61(1)


Pairing this system with a
BLUETOOTH device
Pairing is an operation where BLUETOOTH
devices register with each other beforehand.
Use the procedure below to pair the system
with your BLUETOOTH device. Once a
pairing operation is performed, it does not
need to be performed again. If pairing is
already completed, proceed to "Playing music
of a BLUETOOTH device" (page 16).
1
Place the BLUETOOTH device to be
connected to this system within
1 meter of the system.
2
Select the BLUETOOTH function.
Press BLUETOOTH  
3
Operate the BLUETOOTH device and
perform the pairing operation.
For details about the operations of
the BLUETOOTH device, refer to the
operation manual supplied with your
BLUETOOTH device.
When searching for this system with the
BLUETOOTH device, a list of the devices
found may appear in the BLUETOOTH
device display depending on the type of
BLUETOOTH device.
Th is system appears as "CMT-U1BT. "
When establishing the connection with
this system, select the audio profi le (A2DP,
AVRCP) at the BLUETOOTH device. If
the BLUETOOTH device does not support
the AVRCP profi le, you cannot perform
playback or other operations with the
system (page 16).
on the unit.
4
En
Pas
on
For
the
ope
BLU
Ent
"PI
Pre
the
the
EN
On
con
dis
"Co
dev
To canc
Press 
Notes
• "Passc
numb
• Th is s
13 dig
• Th e p
aft er a
the pr
• While
system
establ
CMT-U