When connecting an Ethernet/wireless LAN media converter to the
NETWORK port of the unit
ADSL modem or ONU
(circuit-terminating equipment)
Network cable
(optional)
Computer
When using a wireless LAN router (access point) and a BUFFALO USB
wireless LAN adaptor
ADSL modem or ONU
(circuit-terminating equipment)
Network
cable
(optional)
Computer
Wireless LAN
router (access
point)
Rear of the
main unit
BUFFALO USB wireless
LAN adaptor WLI-U2-KG54
(optional)
Wireless LAN
router (access
point)
Rear of the main unit
If you have changed
the router, you will
Ethernet/wireless
have to set up your
LAN media
computer for use
converter (optional)
with that router. For
details on the setup
procedure, refer to
the operating manual
Network cable
supplied with the
(optional)
router.
To the
NETWORK
Go to "To set up a wired LAN
port
network" on page 92.
Note
When connecting a USB
wireless LAN adaptor to
the USB jack on the rear
of the unit, make sure to
use a USB extension cable
to obtain better wireless
reception.
To the USB
connecting jack
Go to "To set up a USB
wireless LAN network" on page 93.
GB