Sony Giga Juke NAS-50HDE Operating Instructions Manual page 106

It takes a while for the unit to connect
to the server.
 I f your Internet connection is not
through a broadband router, it may take
about 30 seconds after turning on the
power for the unit to obtain an IP address
and start connecting to the server.
 Th e IP address set for the unit is already
being used by other device. Set a different
IP address.
Connection to the server cannot be
achieved or playback is not possible.
 I f you add a broadband router after
using the unit in the network connection
without using a broadband router, the IP
address may be changed automatically
and the connection with the server may
become impossible. In this case, go to the
selectable server list display and update
the setting to obtain a new IP address.
(Refer to "The server you want to
connect does not appear in the selectable
server list display" on page 105.)
The sound skips.
 S ound skipping may occur depending on
the network environment.
 S ound skipping may occur when the
server is running many applications.
Close the other applications on the
server.
 S ound skipping may be caused by
electromagnetic waves when the unit is
connected to a wireless LAN network.
The audio format that appears on
the unit is different from that on the
server.
 Th e audio format for playback via a
network is displayed on the unit. This
may differ from the format displayed on
the server.
10
GB
"Incompatible format found." appears
in the display and the track cannot be
played.
 C heck to confirm whether the audio file
on the server is damaged or erased. Refer
to the operating manual of the server.
Internet
The unit cannot connect to the
Internet.
 Th e network setting may be incorrect.
Consult your Internet service provider.
 E nter the Setup menu and select
[Network] – [Network status check] to
confirm the network status.
 M ake sure the broadband router setting
is correct. For details on the broadband
router setting, refer to the operating
manual of the router and the materials
provided by the Internet service provider.
 M ake sure the network cables are firmly
connected.
 M ake sure the correct network cables are
being used for connections (pages 87 to
89).
 Th e unit is connected directly to a
modem without a built-in router. Make
the connection through a broadband
router.
 I f your contract with your Internet
service provider limits Internet
connection to one device at a time,
the unit will not be able to access the
Internet when another device is already
connected.
Consult your Internet service provider.
 W hen the unit is connected through a
wireless LAN network, electromagnetic
radiation may sometimes prevent it from
connecting to the Internet.