Listening To Audio From A Connected Component; Recording On A Connected Component - Sony CMT-L1 Operating Instructions Manual

Listening to audio from a
connected component
1
Connect the audio cord.
See "Hooking up optional components" on
page 22.
2
Press FUNCTION repeatedly until "MD"
or "TAPE" appears.
Start playing the connected component.
To switch the function from "MD" to
"TAPE"
When you listen to the connected tape deck, do
the following procedure.
1
Turn on the system.
2
Press FUNCTION repeatedly until "MD"
appears.
3
Press MENU/NO on the remote.
"TAPE?" appears.
4
Press ENTER/YES on the remote.
To switch back to "MD", do the procedure
again.
Recording on a connected
component
Making a digital recording on
a digital component
1
Connect the digital optical cable.
See "Hooking up optional components" on
page 22.
2
Start recording.
Refer to the operating instructions provided
with connected component.
Making an analog recording
on a component
1
Connect the audio cord.
See "Hooking up optional components" on
page 22.
2
Start recording.
Refer to the operating instructions provided
with connected component.
GB
23