Listening To Audio From A Connected Component - Sony CMT-HPX1OW Operating Instructions Manual

To enhance your system you can connect optional components. Refer to the operating instructions
provided with each component.
L Optional analog component
From the audio output
jacks of an optional
analog component
,A
[] MD/VIDEO jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck, etc.) to
these jacks. You can then listen to the sound
from the component.
Listening to audio from a
connected component
1 Connect audio cords.
See the illustration above.
2 Press FUNCTION repeatedly until "MD" or
"VIDEO" appears.
Start playing the connected component.
Tip
If you catmot select "VIDEO" by pressing
FUNCTION repeatedly, tm-n off the system and then
press I/(_) on the unit while holding down FUNCTION
on the unit. The flmction will change froln "MD" to
"VIDEO", and "VIDEO" will appear in the display To
change back to "MD", repeat the same procedure.
However, _u cannot switch the MD'VIDEO flmction
in Power Saving Mode•
b
O
o
3
"o
o