Listening To Audio From A Connected Component - Sony CMT-NEZ5 Operating Instructions Manual

To enhance your system you can connect optional components. Refer to the operating instructions
provided with each component.
Stereo mini-plug
From the audio output
jacks of an optional t
analog component
[] AUDIO IN jack
Use andio cords (not supplied) to connect an
optional analog component (Portable Audio
Player, etc.) to this jack. You can then record or
listen to the sound from the component through
this svstem.
Listening to audio from a
connected component
1
Connect the audio cords.
See "Hooking up optional components".
2 Press FUNCTION repeatedly until "AUDIO
IN" appears.
Start playing the connected component.
@ @
Optional analog component
Recording audio from a
connected component
1
Connect the audio cords.
2 Start recording manually.
See "Recording on a tape manually" on
page 16.
Notes
• If the connected component has the AVLS
(Amonmtic Volume Limiter System) fimction, be
sme to tmn offflle fimction when using the
transmitter. Otha_vise, you will have to _tlln tip the
vohune of the speaker, and that may cm_sedistortion.
• If the connected component has the BASS BOOST
or MEGA BASS fimction, be sure to mm off tl_e
fimction when using the transmitter. Othaavise, the
sotmd fiom the speaker may be disto;_ed.
b
O
o
3
"O
o
-I
@
-I
21c8