Setting The Clock - Sony CMT-LX50WMR Operating Instructions Manual

To remove the oval attachment for
"WALKMAN"
Press down on the right side of the
attachment.
When the left side rises up, grasp the
attachment and remove it.
1
GB

Setting the clock

Use buttons on the remote to set the
clock.
1
Turn on the system.
Press /.
2
Select the clock set mode.
Press TIMER MENU.
If "PLAY SET" flashes, press /
repeatedly to select "CLOCK, " and
then press .
3
Set the time.
Press / repeatedly to set the hour,
and then press .
4
Use the same procedure to set
the minutes.
Note
The clock settings are lost when you disconnect
the power cord or if a power failure occurs.
To display the clock when the system
is off
Press DISPLAY. The clock is displayed for
about 8 seconds.