Listening To The Radio - Sony CMT-LX50WMR Operating Instructions Manual

Listening to the radio

1
Select "TUNER FM" or "TUNER
AM. "
Press FUNCTION +/ repeatedly.
2
Perform tuning.
For automatic scanning
Press TUNING MODE repeatedly
until "AUTO" appears, and then press
+/ (or TUNE +/ on the unit).
Scanning stops automatically when
a station is tuned in, and "TUNED"
and "ST" (for stereo programs only)
appear.
If "TUNED" does not appear and the
scanning does not stop, press  to
stop scanning, then perform manual
tuning (below).
When you tune in a station that
provides RDS services, the station
name appears on the display
(European and UK models only).
For manual tuning
Press TUNING MODE repeatedly
until "MANUAL" appears, and then
press +/ (or TUNE +/ on the
unit) repeatedly to tune in the desired
station.
Tip
To reduce static noise on a weak FM stereo
station, press FM MODE repeatedly until
"MONO" appears to turn off stereo reception.
Presetting a radio station
Use buttons on the remote to preset
stations.
1
Tune in the desired station.
2
Press TUNER MEMORY to select
the tuner memory mode.
3
Press +/ repeatedly to select
the desired preset number.
If another station is already assigned
to the selected preset number, the
station is replaced by the new station.
4
Press to store the station.

Preset number

Continued
1
GB