Table of Contents
Advertisement
Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again after removing
it from the system. Then perform
transferring again.
If the transfer and erase operations
are repeated multiple times, the file
structure within the USB device
becomes fragmented. Refer to the USB
device operation manual for how to
deal with this problem. If the problem
persists, contact your nearest Sony
dealer.
Transferring music to a "WALKMAN"
or a USB device results in an error.
You are using an unsupported device.
Check the information on the websites
about compatible "WALKMAN"
models and USB devices (page 18).
Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device
off and then on again after removing
it from the system. Then perform
transferring again.
The "WALKMAN" or the USB device
was disconnected or the power was
turned off during the transfer process.
Delete the partially-transferred file, and
perform transferring again. If this does
not fix the problem, the "WALKMAN"
or the USB device may be broken.
Refer to the operation manual
supplied with the "WALKMAN" or
the USB device for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.
Files or folders on the USB device
cannot be erased.
Check if the USB device is write-
protected.
The USB device was disconnected
or the power was turned off during
the erase operation. Delete the
partially-erased file. If this does not
fix the problem, the USB device may
be broken. Refer to the USB device
operation manual for how to deal with
this problem. If the problem persists,
contact your nearest Sony dealer.
Are you using a supported
"WALKMAN" or USB device?
If you connect an unsupported device,
the following problems may occur.
Check the information on the websites
about compatible "WALKMAN"
models and USB devices (page 18).
The "WALKMAN" or the USB
device is not recognized.
File or folder names are not
displayed on this system.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
Transferring stops before it is
finished.
There is no sound.
The "WALKMAN" or the USB device
is not connected correctly. Turn
off the system, then reconnect the
"WALKMAN" or the USB device.
Continued
GB
Advertisement
Table of Contents
