Table of Contents
Advertisement
2
Select the USB function.
Press FUNCTION +/ repeatedly.
3
Press / or
repeatedly to select the audio file or
folder you want to erase.
4
Press TOOL MENU (or USB ERASE on
the unit).
"ERASE" appears (only when using
the remote).
5
Press (or ENTER on the unit).
"TRACK ERASE" or "FOLDER
ERASE" appears in the display.
To cancel the erase operation, press .
6
Press (or ENTER on the unit).
The selected audio file or folder is
erased.
Tip
You can also erase audio files and folders from
the "WALKMAN" with the USB connection on
your computer. Refer to the operation manual
supplied with the "WALKMAN" for details on
the operation method.
Folder and file generation rules
When first transferring music to a
"WALKMAN" or a USB device, a
"MUSIC" folder is created directly below
the "ROOT. "
Folders and files are generated within this
"MUSIC" folder as follows.
CD SYNC
1)
Music
Folder name
source
MP3
Same as the music source
CD-DA
"CDDA001"
+/
File name
2)
"TRACK001"
3)
4)
REC1
Music
Folder name
source
MP3
"REC1"
CD-DA
In Program Play mode, the folder name is
1)
"PGM_xxx, " and the file name depends on
the music source (CD-DA disc or MP3 disc).
Up to 64 characters of the name are assigned.
2)
Folder numbers are assigned serially
3)
thereafter up to the maximum 999 (including
the "ROOT" and "MUSIC" folders).
File numbers are assigned serially thereafter.
4)
A new file is created in the "REC1" folder
5)
each time REC1 is performed.
Notes on the "WALKMAN" and the
USB device
Do not connect the "WALKMAN" to the
unit while the "WALKMAN" is updating its
database.
When transferring music from a CD, the
tracks are transferred as 128 kbps MP3 files.
When transferring music from an MP3 disc,
MP3 files are transferred with the same bit
rate as the original MP3 files.
File name
Same as the
5)
music source
2)
"TRACK001"
4)
Continued
GB
Advertisement
Table of Contents
