Table of Contents
Advertisement
Using the "WALKMAN"
A "WALKMAN" equipped with a
WM-PORT can be connected to the
WM-PORT on the unit, using the
supplied ether one, type A or B, of oval
attachments for "WALKMAN" models.
The following steps for installation and
removal are described using the oval
attachment A.
Oval attachments for "WALKMAN"
models
The following "WALKMAN" models
are compatible with the supplied oval
attachments.
Make sure to use the compatible oval
attachment for your "WALKMAN. " The
attachment type (A or B) is indicated on
the bottom of each attachment.
Type A attachment
Compatible "WALKMAN" models:
NW-S600 series, NW-S700F series,
NW-A800 series, NWZ-A810 series,
NWZ-A820 series, NWZ-A820K series,
NWZ-A720 series, NWZ-S730 series,
NWZ-S630 series, NWZ-E430 series
Type B attachment
Compatible "WALKMAN" models:
NWZ-S510 series, NWZ-S610F series,
NWZ-X1000 series
Install the compatible oval
attachment for "WALKMAN. "
Match the hole inside the
WM‑PORT with the projection
on the left side of the
attachment.
Continued
1
GB
Advertisement
Table of Contents
