Table of Contents
Advertisement
When using CD SYNC
When the transfer is completed,
access to the "WALKMAN" or the
USB device and the CD player stop
automatically.
When using REC1
When the transfer is completed,
access to the "WALKMAN" or the
USB device stops automatically and
the CD player continues playback.
To select the memory on the USB
device
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select
which memory to read to and then start
transferring.
1
Connect the USB device to the
(USB) port.
2
Select the USB function.
Press FUNCTION +/ repeatedly.
3
Press TOOL MENU in stop mode.
"USB SEL" appears. If an audio file or
a folder is selected, "ERASE" appears
instead. Press / repeatedly to
select "USB SEL. "
4
Press (or ENTER on the unit).
The name of a memory appears.
The displayed name varies depending
on the specifications of the USB
device.
5
Press / repeatedly to select
the memory.
Proceed to step 6 if only one memory
can be selected.
To cancel this operation, press .
6
Press (or ENTER on the unit).
7
Start transferring by following steps
2 through 5 of "Transferring music
from a disc to a "WALKMAN" or a USB
device. "
GB
To stop transferring
Press .
To erase audio files or folders from the
"WALKMAN" or the USB device
You can erase audio files or folders from
the "WALKMAN" or the USB device.
Note that you cannot erase audio files
and folders on the USB device in shuffle
play or program play mode.
1
Connect the "WALKMAN" or the USB
device to the
connecting the "WALKMAN, " make
sure to use the USB cable for WM-
PORT supplied with the "WALKMAN"
as shown below.
(USB) port. When
Advertisement
Table of Contents
