Table of Contents
Advertisement
3. Name and Function of Each Part
3.3
Top Panel
RESET/START switch
3.3.1
LED
The four LEDs located on the top panel indicate debugging and Flash programming statuses.
The indicated status differs between ICD mode and Flash programmer mode.
3.3.1.1
In ICD mode
LED1 (CPU)
This LED indicates the target CPU selected using SW1.
S1C17
S1C33
LED status
–
–
LED2 (ICD MODE)
Illuminates as shown below when ICD mode is selected using SW2 and SW3.
S1C17
S1C33
LED status
10
Figure 3.3.1 Top Panel
Table 3.3.1.1.1 LED1 Status
(blue)
Target CPU is an S1C17xxx or a product in which the S1C17 Core is embedded
(C17).
(green)
Target CPU is an S1C33xxx or a product in which the S1C33 Core is embedded
(C33).
Table 3.3.1.1.2 LED2 Status
(blue)
The S5U1C17001H is being operated in ICD mode.
Seiko Epson Corporation
Status
Status
S5U1C17001H2 User Manual
(ICDmini Ver2.0)
Advertisement
Table of Contents
