Installing Sensor Probes - Hussmann DM LOW HEIGHT Series Installation Manual

PRODUCT INSTALLATION MANUAL

Installing Sensor Probes

The DM13 range or cases have the probes pre fitted at the factory. Probe location as per Fig 17
Probe location:
1. Air off probe in the ceiling panel.
2. Defrost temp probe in the coil area
3. Suction coil temp probe in the coil area.
_________________________________________________________________________________________________________________________
Page 17
CAUTION
Refer to relevant State or Territory legislation
relating to safe working heights.
Fig (17) Location of probe
CAUTION
Do not walk or sit on cases.
DM13 FRONT OPEN MULTIDECK
AIR OFF PROBE
DEFROST TEMP PROBE
SUCTION COIL TEMP PROBE
Hussmann