Sealing Case Joins - Hussmann DM LOW HEIGHT Series Installation Manual

PRODUCT INSTALLATION MANUAL
Sealing Case Join
Before joining, all cases must be sealed to protect against water and air leakage.
To seal the joins
1. Remove the shelves and racks from the end bays, if necessary
2. Remove the pan decks.
3. Apply a bead of sealant (approximately 10mm wide) ensure case seal correctly.
_________________________________________________________________________________________________________________________
Page 8
CAUTION
Electrical cords are connected between Air Delivery
Panels and Shelves on Meat and Deli cases.
Take care if disconnecting leads to remove Shelves
when joining the cases
Fig (8) Case-end sealing positions
DM13 FRONT OPEN MULTIDECK
Sealant DO NOT leave any
gaps to ensure cases seal
correctly on edge of frame.
Hussmann