PRODUCT INSTALLATION MANUAL
3. Fix remaining pipe work to floor waste drains.
4. Test for leakage by pouring water down the drain and ensure trap is primed before starting refrigeration.
5. NOTE: All joints to be glued with suitable adhesive.
Connecting Power Supply (only for electronically controlled versions)
•
The appliance must be installed so the power is accessible.
•
To ensure that the appliance is not accidentally switched off, connect unit to its own power source. Do not
connect any other appliance using this source.
•
Size the cable according to AS3008 or relevant local standards. For power rating please refer to product
engineering datasheet for details.
Ensure the appliance is properly grounded (earthed).
_________________________________________________________________________________________________________________________
Page 16
CAUTION
Incorrectly installed drain traps will result in
adverse air leaking into the case.
DM13 FRONT OPEN MULTIDECK
Hussmann