Related Manuals for Hussmann Chino DBP Series
Summary of Contents for Hussmann Chino DBP Series
- Page 1 DBP, DBRP 01,03 ISLAND PRODUCE P/N IGIP-DBP, DBRP 01,03-0210 INSTALLATION & OPERATION GUIDE...
-
Page 2: Table Of Contents
HUSSMANN CHINO PRODUCT CONTROL The serial number and shipping date of all equipment has been recorded in Hussmann’s files for warranty and re- placement part purposes. All correspondence pertaining to warranty or parts ordering must include the serial num- ber of each piece of equipment involved, in order to pro- vide the customer with the correct parts. -
Page 3: Cut & Plan Views
Rev.0210 Cut & Plan Views Optional Ref. High Center Divider and Ref. Lighted Shelves 30" Optional Base Display Optional 11" Base Display DBRP-03 " " " Shown with Optional " Ref. High Center Divider and DBP-03 Refrigerated Lighted Shelves Standard Section Scale = 3/8”... -
Page 4: Installation
IGIP-DBP, DBRP 01,03-0210 Cut & Plan Views Optional Optional 9" Straight Step Racks Step Racks 4" 9" Racks Straight 4" " Racks " " 8'-1" " " 6'-11 " " 10'-6 " 9'-4 " DBRP DBRP Crown Section Scale = 1/4" Octagon Section Scale = 1/4"... -
Page 5: Leveling
Rev.0210 Installation (cont.) SETTING AND JOINING 6. Slide second case up to first case snugly. Then level The sectional construction of these models enable them second case to the first case so glass front, bumper to be joined in line to give the effect of one continuous and top are flush. -
Page 6: Plumbing
IGIP-DBP, DBRP 01,03-0210 Plumbing WASTE OUTLET AND P-TRAP one line. Double P-traps in series will cause a lock The waste outlet is located off the center of the case on and prevent draining. one side allowing drip piping to be run lengthwise under 3. -
Page 7: Refrigeration
Rev.0210 Refrigeration REFRIGERANT TYPE to meet conditions present at your location. The standard refrigerant will be R-22 unless otherwise ACCESS TO TX VALVES & DRAIN LINES specified on the customer order. Check the serial plate MECHANICAL - Remove product from end of case. Remove on the case for information. -
Page 8: Electrical
IGIP-DBP, DBRP 01,03-0210 Electrical WIRING COLOR CODE control panel to the merchandisers is required for re- frigeration thermostats. Most component amperes are listed in the “Case Specs” section, but always check the GREEN GROUND PURPLE ANTI-SWEAT serial plate. ORANGE LIGHTS YELLOW RECEPTACLE BALLAST LOCATION... -
Page 9: User Information
SHUT Hussmann cases were not designed to “heat up” or “cool OFF FAN DURING CLEANING PROCESS. It can be un- down” product—but rather to maintain an item’s proper plugged within the case, or shut off case at the source. -
Page 10: Maintenance
REPLACING FLUORESCENT LAMPS COPPER COILS Fluorescent lamps are furnished with a shatterproof pro- The copper coils used in Hussmann merchandisers may tective coating. The same type of lamp with protective be repaired in the field. Materials are available from local coating must be used if replaced. -
Page 11: Electrical And Refrigeration Specifications
(14) •Hussmann Chino reserves the right to change or revise case specifications and design in connection with any feature of our products. Such changes do not entitle the buyer to corresponding changes, improvements, additions, or replacement of equipment previously sold or shipped. These changes may also affect the loads applicable to a particular case,... -
Page 12: Electrical Schematics
IGIP-DBP, DBRP 01,03-0210 Electrical Schematics... - Page 13 Rev.0210...
- Page 14 IGIP-DBP, DBRP 01,03-0210...
-
Page 15: Appendices
Rev.0210 Appendices APPENDIX A. – Temperature Guidelines tions and recommendations provided by the manufacturer for the Refrigerated installation of each individual type refrigerator. The refrigerators should be operated according to the manufacturer’s 1.2 Refrigeration piping should be sized according to the equipment published engineering specifications for entering air temperatures manufacturer’s recommendations and installed in accordance with for specific equipment applications. -
Page 16: Appendix D. - Recommendations To User
IGIP-DBP, DBRP 01,03-0210 potentially hazardous food. 12. Are the shelf positions, number, and size other than recom- mended by the manufacturer? 1.1 The following recommendations are made for the purpose of arriving at easily taken and understood data which, coupled with 13. - Page 17 Rev.0210 d) Care must be taken when cross merchandising products to ensure that potentially hazardous vegetable products are not placed in non refrigerated areas. e) Display and storage equipment doors should be kept closed during periods of inactivity. f) Minimize the transfer time of perishables from storage to display.
- Page 18 IGIP-DBP, DBRP 01,03-0210...
- Page 19 On Hussmann refrigeration systems, an additional (4) year extended warranty for the motor/compressor assembly is available, but must be purchased prior to shipment to be in effect. Hussmann reserves the right to inspect the job site, installation and reason for failure.
- Page 20 Additional copies of this publication may be obtained by contacting: They can be found on a small metal plate on the unit. Hussmann ® Chino Please note them below for future reference.