Table of Contents
Advertisement
5 Make wireless LAN settings
Make the wireless LAN settings while watching the screens displayed on your TV. If you are
connecting the Network Media Receiver to your computer via a network cable, skip this procedure,
and go to "6 Change settings of Network Media Receiver to match network connection" (page 45).
See page 14 for the location of buttons on the remote control, and page 17 for remote control
operations.
1
Press the TV POWER button on the remote control to turn the TV set
on.
2
Use the TV/VIDEO button on the remote control to set the TV to
display the signal from the input to which the Network Media Receiver
is connected.
3
Press the Network Media Receiver POWER button to turn the Network
Media Receiver on.
The standby indicator changes to green, and the ??? "Server List" ??? screen
appears on the TV.
4
Press the OPTIONS button on the remote control.
The Options menu appears.
5
Use the V/v buttons to select ??? "System Setup" ???, and press the
SELECT button.
The ??? "System Setup" ??? screen appears.
6
Use the V/v buttons to select ??? "Network" ???, and press the
SELECT button.
The ??? "Network Setup" ??? screen appears.
32
Advertisement
Table of Contents
