Table of Contents
Advertisement
5
Use the V/v buttons to select ??? "System Setup" ???, and press the
SELECT button.
The ??? "System Setup" ??? screen appears.
6
Use the V/v buttons to select ??? "Network" ???, and press the
SELECT button.
The ??? "Network Setup" ??? screen appears.
7
Change the IP address allocation method and specify the IP address.
Use the V/v buttons to select ??? "IP address" ???, and press the SELECT
1
button.
The ??? "IP address" screen appears.
2
Use the V/v buttons to select the setting that matches your network
environment, and press the SELECT button.
If the environment includes a router: select ??? "Obtain an IP address
automatically (router present)" ???
If the environment does not include a router: select ??? "Obtain an IP address
automatically (no router)" ???
3
If you have selected ??? "Specify IP address" ???, use the V/v/B/b buttons to
select "OK", and press the SELECT button. Then use the number buttons or
the V/v buttons to enter the IP address and subnet mask, and press the
SELECT button.
4
Use the V/v/B/b buttons to select "OK", and press the SELECT button.
When the message for restarting the Network Media Receiver appears, select
"OK" and press the SELECT button. The Network Media Receiver will restart
and then enter the standby condition.
z
Hint
If you have selected ??? "Obtain an IP address automatically" ???, the assigned IP address will be
displayed if you access the "IP address" screen after the Network Media Receiver has restarted.
36
Advertisement
Table of Contents
