Table of Contents
Advertisement
Case 2: Connecting via a hub (system environment B)
*1
The connection may be different, depending on the respective system connection environment. For
details, contact the technical support department of your Internet Service Provider.
*2
Use a hub that supports 100BASE-TX.
Notes
• Use a router with built-in hub (or stand-alone hub) that supports 100BASE-TX.
• Use network cable that supports 100BASE-TX.
• The factory default setting of the Network Media Receiver is ??? "Obtain an IP address automatically
(router present)" ???. Depending on your system environment, this setting may have to be changed. For
information on how to do this, see page 00.
z
Hint
As shown on the previous page and in the illustration above, multiple computers can be connected.
28
Network cable
(not supplied)
To NETWORK
connector
Computer 1
To NETWORK
connector
Computer 2
ADSL modem, cable modem or
similar without router capability *
LAN
LINE
(third-party)
2
Hub *
Network cable
(supplied)
Network cable
(not supplied)
(third-party)
To NETWORK
connector
Network Media Receiver
1
Advertisement
Table of Contents
