Table of Contents
Advertisement
When computer is connected to Internet not via network (LAN) cable
or is not connected to Internet
System environment
E
Using an internal modem to connect to the Internet
F
Not connected to the Internet
G
Connecting to multiple computers in the E or F
environment
v
A router with built-in hub (or a stand-alone
hub) is required.
z
Hints
• To check whether your ADSL/cable modem has router capability, consult the instructions that came
with the modem.
• The factory default setting of the Network Media Receiver is ??? "Obtain an IP address automatically
(router present)" ???. Depending on your system environment, this setting may have to be changed. For
information on how to do this, see page 00.
26
How to connect
See "Case 3: Network connector of computer
is free" (page 28).
Note
After connection, set the IP address of the
computer to a fixed value, as described in
"Assigning a fixed IP address to the
Network Media
computer" (page 00).
Receiver
Network Media
Receiver
See "Case 1: Connecting via a router with
built-in hub" (page 26, G).
Note
When using a stand-alone hub, set the IP
address of the computer to a fixed value, as
described in "Assigning a fixed IP address to
the computer" (page 00).
Network Media
Receiver
Advertisement
Table of Contents
