Using The Software Keyboard - Sony VGC-RA304 Operating Instructions Manual

Using the software keyboard

When the setting for SSID or encryption key is selected at the ??? "Wireless LAN Environment"
??? screen, the software keyboard appears on the screen.
Use this display to input a character string as follows.
1
Select the input mode.
Use the V/v/B/b buttons to select ??? "Number" ???, ??? "Lower Case" ???, ???
"Upper Case" ???, or ??? "Symbols" ???, and press the SELECT button.
The key input buttons for the selected mode are shown on the screen.
2
Use the V/v/B/b buttons to select the desired character, and press the
SELECT button.
The selected character appears at the character cursor position in the display field.
3
Repeat steps 1 and 2 to enter the full string for the SSID or encryption
key field.
4
When the input is complete, use the V/v/B/b buttons to select ???
"Accept" ???, and press the SELECT button.
The entered character string is set as SSID or encryption key, and the software
keyboard display closes.
To delete the character before the character cursor
Use the V/v/B/b buttons to select ??? "Delete Character" ???, and press the SELECT button.
To redo the input
Use the V/v/B/b buttons to select ??? "Delete All" ???, and press the SELECT button.
The entire string entered so far is cleared.
To enter a space
Use the V/v/B/b buttons to select ??? "Space" ???, and press the SELECT button.
34