5
Under the "General" tab, select "Internet Protocol (TCP/IP)" and click
"Properties".
The "Internet Protocol (TCP/IP) Properties" screen appears.
6
Select "Use the following IP address" and make entries in the "IP
address" and "Subnet mask" fields as follows.
When multiple computers are connected to the Network Media Receiver, assign
different values to the respective computers.
IP address
Subnet mask
7
Click "OK"
The fixed IP address selected above is assigned to the computer. Close the "Local
Area Connection Properties" and "Network Connections" screens.
30
169.254.XXX.XXX (enter "169.254" followed by two blocks of
three-digit numbers selected by you, such as "222.222")
255.255.0.0