Sony VGC-RA304 Operating Instructions Manual page 21

To connect the Network Media Receiver to a TV via a VCR
Make the connection as shown below.
To AUDIO/VIDEO
connectors
To connect the Network Media Receiver to a TV with component video
input
Use a component video cable (not supplied) to connect the Network Media Receiver to the
component video input on the TV, as shown below. Insert each plug into the connector of the same
color.
Component video
cable (not supplied)
To COMPONENT
VIDEO OUT connectors
To video input
Audio/video cable
(supplied)
To component
video input
l : Signal flow
l : Signal flow
21