Siemens SITRANS F M Verificator Operating Instructions Manual page 10

Operating (hardware)
3.2 Verificator software - transmitter
Use the "up" or "down" arrow buttons to select the file where you want to store the verification
result.
-> file name <- states that the file is empty, +> file name <+ states that the file contains data. In
this case select a new file or overwrite the existing file.
Press GO to initiate the verification
Files can be renamed when a PC is connected.
For more information on file names, refer to Renaming files in the SITRANS F M Verificator
(Page 29).
Select file name:
-> File #1 <-
File #2
File #3
Is only displayed if the selected file is not empty.
Press GO to continue and to overwrite the selected file. Press ESC to return to "select file".
WØ: File not empty
"File Name"
Press GO to continue
Press ESC to cancel
Transmitter initialization
SENSORPROM
Press ESC to cancel the verification.
Starting transmitter
Getting data from
SENSORPROM .......
Press ESC to cancel
After restarting the transmitter, the verification starts.
Press ESC to cancel the verification.
Restarting transmitter
Preparing for test ....
Press ESC to cancel
Transmitter test
The bar indicates how the test is progressing.
Press ESC to cancel the test.
T1:3 Transmitter test
10
memory unit data is read.
®
SITRANS F M Verificator
Operating Instructions, 07/2019, A5E45134218-AB