Sofware Installation; Installation Of Pc Software - Siemens SITRANS F M Verificator Operating Instructions Manual

Sofware installation

4.1

Installation of PC software

Newest version of PC software can be downloaded from this link:
Siemens Support Automation
21230153)
Verificator software can be found on the CD supplied. The installation procedure is as follows:
● Insert CD number 1 into the correct drive.
● From the Windows "Start" menu, choose "Run".
● Type in a:\setup (substitute "a" if you have another letter assigned to your or CD-ROM drive).
● Click "OK".
● Choose "Install". The installation process continues by copying the relevant files to the PC
and initialising the software. A new folder called "SITRANS F M MAGFLO
will be added to the programs folder which can be found by pressing "start" on the Windows
task bar. In this folder the "SITRANS F M MAGFLO" icon can be found which runs the
Verificator software.
Note
If you experience any problems running the Verificator software, e.g. problems accessing the
Verificator, we suggest the following:
Uninstall the Verificator software programme and all other programs or applications on your PC
that may use or control the serial port to which you connect the Verificator unit. Then reinstall
and run the Verificator software.
SITRANS F M Verificator
Operating Instructions, 07/2019, A5E45134218-AB
(http://support.automation.siemens.com/WW/view/en/
4
- PC Software"
®
17