Storage controller port indicators
The Ethernet port LED indicators for the storage controllers are found on the rear of the storage block.
Each Ethernet port has two LED indicators:
• Activity LED indicator:
– On: traffic is present on the port
– Off: no traffic is present
• Error/Warning LED indicator:
– On: fault conditions are present
– Off: the port is operating under normal conditions
Figure 31. Storage controller port indicators
Shutting off a storage controller
This procedure describes how to shut off a storage controller.
Procedure performed by: Solution administrator, or ThinkAgile Advantage Support (optional, via Chapter 4
"Support Mode" on page 13).
Execution: On hardware
Storage controllers must be shut off in the storage controller itself, not in the Cloud Controller. To connect to
the OS running on the storage controller, connect your laptop to the storage controller and use the Hardware
Console available on the storage controller action menu in the Cloud Controller.
While connecting to the storage controller, enter the username manager and the password set during
installation. If you have forgotten the password, reset it in the Cloud Controller.
.
Chapter 6
Storage block maintenance procedures
51