Lenovo ThinkAgile CP Part Replacement And Component Maintenance Procedures page 39

• For an 80x80x80mm fan:
1. Carefully pull the cable out from underneath the sheet metal flange.
2. Disconnect the cable.
3. Grasp the fan and lift it out of the enclosure.
Figure 18. 80x80x80mm fan removal
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install a fan
Use this information to install a fan in the enclosure.
Chapter 3 "Read
the
Installation
Guidelines" on
page 9
To avoid possible danger, read and follow the following safety statement.
• S017
CAUTION:
Hazardous moving fan blades nearby.
• S033
"ATTENTION:
Static Sensitive Device
Ground package before
opening" on page 11
.
Chapter 5 Compute block maintenance procedures
33