Hot-Swap Drive Removal - Lenovo ThinkAgile CP Part Replacement And Component Maintenance Procedures

Figure 32. Hot-swap drive removal
Step 2. Grasp the handle and slide the drive out of the drive bay.
Figure 33. Hot-swap drive removal
Step 3. After removing a hot-swap drive:
• Install the drive filler or a new drive to cover the drive bay. See "Install a hot-swap drive" on page
57.
• If you are instructed to return the old hot-swap drive, follow all packaging instructions and use
any packaging materials provided.
Install a hot-swap drive
Use this information to install a hot-swap drive.
.
Chapter 6 Storage block maintenance procedures
57