Graco Fire-Ball 246775 Quick Start Manual page 33

33. Clean the threads of the fluid pis-
ton (43) and apply Loctite to the
threads.
Loctite will not work on oily
threads. Be sure to clean threads.
34. Thread the fluid piston
the displacement rod (29). Torque
to 40 to 60 ft-lb (54 to 81 N.m).
35. Replace the fluid cylinder
with valve housing (42)
the air motor base (28). Torque to
40 to 60 ft-lb (54 to 81 N.m).
36. Using a strap wrench or chain
wrench, torque the valve housing
(42) to 40 to 60 ft-lb (54 to 81
N.m).
Assembly is complete.
309869C
(43) onto
(41)
back into
Reassembly
33