Graco Fire-Ball 246775 Quick Start Manual page 24

6. Thread the bottom valve nuts
(24*) onto the stems of the poppet
valves until there are a few
threads left before the threads run
out.
If you thread the valve nuts too
far down onto the poppet valves, they
will run off of the threaded part.
7. Assemble the trip rod yoke
and actuator valve
the trip rod (40).
8. Grease heavily and place the trip
rod (40) into the air motor piston
(34) with the stems of the poppet
valves (32*)
lower valve grommets (17*).
24
(23)
(27) and insert
going through the
Reassembly
309869C