Graco Fire-Ball 246775 Quick Start Manual page 26

12. Place the toggle arm
the toggle assembly onto the tog-
gle pins (36), and snap the pivot
pin ends of the toggle assembly
into the piston lugs.
13. Set gap using the gap adjustment
tool*.
*Use part no. 15E796, which is also in-
cluded in Repair Kit 246918, for Mini
Fire-Ball 225 pumps. Use
171818 for all other Fire-Ball pump
models.
Adjust the distance between the
inlet valve poppets and the piston seat
by turning the top valve nuts (24*).
14. Tighten the bottom valve nuts
(24*) very tight by hand. The lower
valve grommets
slightly compressed.
26
(38) ends of
part no.
(17*) should be
Reassembly
309869C