15. Align the holes in the valve nuts
(24*)
and the slots on the stems of
the poppet valves
the lock wires
(25*)
holes in the top and bottom valve
nuts. For more detail see
page
36.
16. Pull the lock wires
tightly, and bend the ends out with
pliers so that they cannot be
pulled back out of the holes.
CAUTION
Never reuse the old lock wires. They
will get brittle and break easily from
too much bending.
17. Grease and install o-ring packing
(18*).
309869C
(32*)
and install
through the
F
. 1,
IG
(25*)
down
Reassembly
27