Table of Contents
Advertisement
PINNACLE HD STAIR LIFT: SECTION 3
OPERATION
The LED indicator light will turn red if there is a service
issue. Turn the "On/Off" switch to the "Off" position and
then back to the "On" position. The lights should sequence
red-amber-green. If the light does not return to green,
contact your dealer.
REMOTE CALL / SEND
CONTROL OPERATION
The key switch on the arm of the chair must be
in the "ON" position to use the remote call/send
control.
Press and hold the appropriate directional
1.
button on the front of the hand control. The
LED indicator light will turn green when a
signal is being sent.
The chair lift will operate with or without
a rider. All safety sensors on the chair lift
are designed to continue to operate in their
normal mode. The LED light indicator on the
armrest will also display the appropriate
color.
If the chair lift fails to respond, this may
2.
indicate the batteries are discharged and
need to be replaced. Remove the back
cover of the control and replace with AAA
batteries, ensuring that the polarity is
correct.
SL600HD PINNACLE STAIR LIFT:
8
13NOV2020 | 75404 REV D
Owner's Manual
Advertisement
Table of Contents
