Troubleshooting; Manual Lowering Tool Operation; Led Indicator Lights - Harmar Mobility PINNACLE SL600HD Owner's Manual

Hide thumbs Also See for PINNACLE SL600HD:
Table of Contents

Advertisement

SECTION 5

TROUBLESHOOTING

MANUAL LOWERING TOOL
OPERATION
If your lift fails to operate and the operator is unable
to exit the lift on the stairway, another person may
use the optional manual override tool to lower or
raise the lift to a landing. However, please follow the
instructions on the bottom safety flap of the lift and
turn the "On/Off" switch to "Off". Insert the manual
override tool into the hole in the lower safety flap
until it engages the motor shaft, then turn in the
direction desired.
!
WARNING
Do not operate the lift with the manual override
tool engaged.
PINNACLE HD STAIR LIFT: SECTION 5
TROUBLESHOOTING

LED INDICATOR LIGHTS

If your lift does not operate, diagnose the problem
by observing the LED indicator light on the armrest
and listening to the beeps emitted:
A green light indicates the lift is in operating
mode and may be moved in either direction.
An amber light indicates the lift is touching an
obstruction and may be operated only in the
direction away from the obstruction.
A flashing amber light, accompanied by
an intermittent beep for 30 seconds (after
a 5 second delay) indicates the lift has
been stopped off the charge station. It is
recommended that the lift be immediately
moved to a charge station (located either end
of the rail).
A red light indicates a problem that may
require a service call. If the light remains red
after attempting to reset the lift by turning it
"Off" and then "On" again, please contact your
local dealer and describe the problem.
SL600HD PINNACLE STAIR LIFT:
Owner's Manual
13NOV2020 | 75404 REV D
11

Advertisement

Table of Contents
loading

Table of Contents