Remote Call/Send Operation - Harmar Mobility PINNACLE SL600 HD Owner's Manual & Warranty Information

HEAVY DUTY STAIR LIFT: SECTION 3
OPERATION
REMOTE CALL/SEND CONTROL
OPERATION
The key switch on the arm of the chair must be in the
"ON" position to use the remote call/send control.
1. Press and hold the appropriate directional
button on the front of the hand control. The LED
indicator light will turn green when a signal is
being sent.
The chair lift will operate with or without a rider.
All safety sensors on the chair lift are designed
to continue to operate in their normal mode. The
LED light indicator on the armrest will also display
the appropriate color.
2. If the chair lift fails to respond, this may indicate
the batteries are discharged and need to be
replaced. Remove the back cover of the control
and replace with AAA batteries, ensuring that the
polarity is correct.
SL600HD Heavy Duty Stair Lift:
8
31JAN2020 | P/N: 75404 REV C
Owner's Manual