Operation; Stair Lift - Harmar Mobility PINNACLE SL600HD Owner's Manual

Hide thumbs Also See for PINNACLE SL600HD:
Table of Contents

Advertisement

SECTION 3

OPERATION

STAIR LIFT

To turn the stair lift on, press the red "On/
1.
Off" switch located on the top of the chassis
to the "On" position and ensure that the key
switch (optional) is "On". When the lift is
turned "On", a green light on the armrest will
indicate that the stair lift is ready for use.
!
CAUTION
Never attempt to operate the lift while standing up.
Always sit in the center of the seat with the seatbelt
fastened around your waist.
When positioning yourself on the seat at the
2.
upper landing, ensure that the seat is fully
swiveled and locked in position for safety. The
seat may be swiveled by pressing the swivel
release handle on either side of the seat.
!
CAUTION
Do not carry pets or children on your lap while riding
the stair lift. The lift is designed for use by only one
person at a time.
Ensure that you are securely seated before
3.
operating the lift. To operate the lift,
continuously press the hand control switch in
the direction in which you wish to travel.
CAUTION
!
Keep your feet centered on the footrest while
traveling up and down the stairs. Never dangle your
feet off the footrest while riding the lift.
PINNACLE HD STAIR LIFT: SECTION 3
If you release the control switch the lift will
4.
stop. Continue to press the switch or button
all the way to the landing. The lift will gently
stop at the appropriate, preset point.
!
When transferring in or out of the seat use the
armrest to assist. Ensure that the seat is securely
latched before transferring in or out.
To safely exit the lift, remove the seatbelt,
5.
support yourself by the armrests, rise and
step off the footrest. At the upper landing,
ensure that the seat is fully swiveled and
locked before rising. If you do not intend
to use the lift again immediately, the seat,
footrest, and armrest may be folded up to
minimize obstruction to people walking on
the stairs.
To operate the lift remotely, continuously
6.
press the appropriate up or down button on
the call/send hand control unit. Hand control
units are typically located at the upper and
lower landings of the staircase.
If you are operating the lift remotely on
behalf of another person, please ensure that
they are securely seated with the seat belt
fastened.
NOTE: An amber light and single beep indicate that the
lift has touched an obstruction and may only be operated
in the opposite direction of the obstruction. Clear the
obstruction before proceeding.
If the light flashes amber and the lift beeps intermittently,
the lift has been stopped away from the top or bottom
charging stations. Please move the lift to either end of the
rail to ensure the batteries remain fully charged.
SL600HD PINNACLE STAIR LIFT:
OPERATION
CAUTION
Owner's Manual
13NOV2020 | 75404 REV D
7

Advertisement

Table of Contents
loading

Table of Contents