Table of Contents
Advertisement
NOTE: If any inductive load devices (relay or contac-
tor) supplied by the user are in the electrical
circuit connected to the dry alarm contacts, the
device must be suppressed at the load with a
RC suppressor YORK Part Number 031-00808-
000 across the inductive coil. (Typically, sev-
eral are supplied loose with the panel.) Failure
to install suppressors will result in nuisance
faults and possible damage to the chiller.
NOTE: If the alarm circuit is applied in an application
used for critical duty (such as process duty or
cooling other critical equipment) and the alarm
circuit should fail to function, YORK will not be
liable for damages.
26001A
SUBORDINATE
Advertisement
Table of Contents
