York Millennium YDAS 410 Installation Operation & Maintenance page 61

CAUTION:
No Controls (relays,
etc.) should be
mounted in the Smart
Panel enclosure or con-
nected to power sup-
plies in the control
panel. Additionally, con-
trol wiring not con-
nected to the Smar t
Panel should not be run
through the cabinet.
This could result in nui-
sance faults.
CAUTION:
Any inductive devices
(relays) wired in series
with the flow switch for
star t/stop, into the
Alarm circuitry, or pilot
relays for pump starters
wired through motor
contactor auxiliary con-
tacts must be sup-
pressed with YORK
P/N 031-00808-000
suppressor across the
relay/contactor coil
which activates the
contacts.
Any contacts con-
nected to flow switch
inputs or BAS inputs on
terminals 13 - 19 or
TB3, or any other ter-
minals, must be sup-
pressed with a YORK P/
N 031-00808-000 sup-
pressor across the re-
lay/contactor coil which
activates the contacts.
CAUTION:
Control wiring con-
nected to the control
panel should never be
run in the same conduit
with power wiring.
CONTROL POWER SUPPLY
CONTROL
UNIT
POWER
VOLTAGE
SUPPLY
ALL MODELS
115-1-50/60
W/O TRANS.
MODELS -17 200-1-60
WITH -28 230-1-60
TRANS. -46 400-1-60
* - 5 8
575-1-60
* All primary and secondary wiring between transformer and control panel included.
MAX NON-
MIN DUAL FUSED
CIRCUIT ELEMENT DISC.
AMP. FUSE SWITCH
SIZE SIZE
20A 20A 250V 30A 240V
15A 15A 250V 30A 240V
15A 15A 250V 30A 240V
8A 8A 600V 30A 480V
8A 8A 600V 30A 600V
LD03687