Quick Start Label Symbols - Champion Global Power Equipment 100519 Operator's Manual

100519 - 6250W OPEN FRAME INvERTER

Quick Start Label Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of
these symbols will allow you to more safely operate the product.
1 2
10W-30
Starting the Engine

Move generator outside and far away from windows,
doors and intake ventilation covers.
1. Check oil level.
Recommended oil is 10W-30.
2. Check gasoline level.
When adding gasoline, use a minimum octane rating of 87
and an ethanol content of 10% or less by volume.
3. Turn the fuel valve to "ON" position.
4. Press the engine switch to the "ON" position.
5. Pull the choke to the "CHOKE" position.
6. Pull the starter cord.
7. Push choke button to the "RUN" position.
8. Plug in desired device.
3 4
Artwork Notes
2mm safe margin; to be printed on white substrate
DANGER
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
IMPORTANT SAFETY INSTRUCTIONS
5 6 7 8
LPN 1544-L-OP Colors
Rev A
K 376 186 152
Size 198 x 25 mm
Revision Changes
Stopping the Engine
---
1. Turn off and unplug all connected electrical loads.
Press the engine switch to the "OFF" position.
2.
Turn the fuel valve to the "OFF" position.
3.
1 2
2945 CG1
3
10