Quick Start Label Symbols - Champion Global Power Equipment 200953 Operator's Manual

200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER

Quick Start Label Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
1 2
10W-30
Starting the Engine

Move generator outside and far away from windows,
doors and intake ventilation covers.
1. Check oil level.
Recommended oil is 10W-30.
2. Check gasoline level.
When adding gasoline, use a minimum octane rating of 87
and an ethanol content of 10% or less by volume.
3. Turn the fuel valve to "ON" position.
4. Press the START/STOP button once.
5. Choke engine
5a. Press the choke button, or
5b. Move choke lever to "CHOKE" position.
6. Pull the recoil cord.
7. Run engine
7a. Press the choke button, or
7b. Move the choke lever to "RUN" position.
8. Plug in desired device.
4 5
3
5A
1X
5B
DANGER
Artwork Notes
2mm safe margin; to be printed on white substrate
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
6 7 8
7A
7B
Stopping the Engine
LPN 2418-L-OP Colors
1. Turn off and unplug all connected electrical loads.
Rev A
K 376 186 152
Size 215 x 25 mm
2. Press the START/STOP button once.
Revision Changes
3. Turn the fuel valve to "OFF" position.
---
Wireless and Electric Start
See page 22 in "Operation" section.
11
IMPORTANT SAFETY INSTRUCTIONS
1 2 3
1X
2945 CG1
2418-L-OP-A