Champion Global Power Equipment 200953 Operator's Manual
  1. Manuals
  2. Brands
  3. Champion Global Power Equipment Manuals
  4. Inverter
  5. 200953
  6. Operator's manual

Champion Global Power Equipment 200953 Operator's Manual

4250w wireless remote start open frame inverter
Hide thumbs
Table of Contents

Advertisement

Quick Links

OPERATOR'S MANUAL
MODEL #200953
4250W WIRELESS REMOTE START OPEN
FRAME INVERTER
REGISTER YOUR PRODUCT ONLINE
at championpowerequipment.com
or visit championpowerequipment.com
SAVE THESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do
so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
REV 20210226
Champion Power Equipment, Inc., Santa Fe Springs, CA USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 200953 and is the answer not in the manual?

Questions and answers

Related Manuals for Champion Global Power Equipment 200953

Summary of Contents for Champion Global Power Equipment 200953

  • Page 1 OPERATOR'S MANUAL MODEL #200953 4250W WIRELESS REMOTE START OPEN FRAME INVERTER REGISTER YOUR PRODUCT ONLINE at championpowerequipment.com or visit championpowerequipment.com SAVE THESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do so could result in serious injury.
  • Page 2 CARBON MONOXIDE SAFETY: THE BIG PICTURE As the only safe way to use a portable generator, taking your generator outside is absolutely mandatory to keep your family safe from carbon monoxide. But there’s even more you can do. By educating yourself about all carbon monoxide risks, you’ll be better prepared to protect your family from this colorless, oderless threat.

  • Page 3: Table Of Contents

    TAbLE OF CONTENTS 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER TAbLE OF CONTENTS Maintenance ..........Cleaning the Generator .......... Introduction ...........

  • Page 4: Introduction

    INTRODUCTION 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER INTRODUCTION SAFETY DEFINITIONS Congratulations on your purchase of a Champion Power Equipment The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, (CPE) product.

  • Page 5: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER IMPORTANT SAFETY INSTRUCTIONS DANGER  Operate equipment with guards in place. WARNING  Rotating parts can entangle hands, feet, hair, clothing and/or Cancer and Reproductive Harm – www.P65Warnings.ca.gov accessories.
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER WARNING CAUTION   Spark from removed spark plug wire can result in fire or Improper treatment or use of the generator can damage it, electrical shock. shorten its life or void the warranty.

  • Page 7: Fuel Safety

    IMPORTANT SAFETY INSTRUCTIONS 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Fuel Safety When transporting or servicing the generator: Always check that the fuel valve is in the OFF position and the DANGER  gasoline tank is empty. For LPG compatible models, check that the LPG cylinder is GASOLINE AND GASOLINE VAPORS ARE HIGHLY disconnected and stored securely away from the generator.

  • Page 8: Safety And Dataplate Labels

    IMPORTANT SAFETY INSTRUCTIONS 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Safety and Dataplate Labels These labels warn you of potential hazards that can cause serious injury. Read them carefully. If a label comes off or becomes hard to read, contact Technical Support Team for possible replacement.

  • Page 9: Safety Symbols

    IMPORTANT SAFETY INSTRUCTIONS 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Safety Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.

  • Page 10: Operation Symbols

    IMPORTANT SAFETY INSTRUCTIONS 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Operation Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.

  • Page 11: Quick Start Label Symbols

    IMPORTANT SAFETY INSTRUCTIONS 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Quick Start Label Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.

  • Page 12: Controls And Features

    CONTROLS AND FEATURES 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER CONTROLS AND FEATURES Read this operator’s manual before operating your generator. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference.

  • Page 13: Control Panel

    CONTROLS AND FEATURES 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Control Panel 1. Wireless Set/Reset – Used to reset or pair remote control(s). RECEPTACLES 2. AC Overload Reset Button – Used to re-energize 12V DC, 8A (Automotive) receptacles after overload fault.

  • Page 14: Intelligauge

    CONTROLS AND FEATURES 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Intelligauge Four mode digital meter for displaying voltage, frequency (hertz), run time, and total run time. The LCD displays each mode by pressing the button below the display.

  • Page 15: Wireless Remote Control

    CONTROLS AND FEATURES 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Wireless Remote Control FCC Statement for Remote Control Device This generator is equipped with a wireless remote control system 1. This device complies with Part 15 of the FCC Rules. Operation for starting and stopping.

  • Page 16: Parts Included

    CONTROLS AND FEATURES 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Parts Included Accessories Dual Port USB Adapter (5v/2.4A) ........Remote Key Fob ............

  • Page 17: Assembly

    ASSEMbLY 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER ASSEMbLY Install the Wheel Kit Your generator requires some assembly. This unit ships from our CAUTION  factory without oil. It must be properly serviced with fuel and oil before operation.

  • Page 18: Connect The Battery

    ASSEMbLY 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Connect the battery 2. Attach the support leg (E) to the generator frame with flange lock nuts (F). 1. Cut cable tie on each side of battery connector. 2. Push two halves of battery connector together tightly.

  • Page 19: Add Fuel

    ASSEMbLY 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER 1. Place the generator on a flat, level surface. Add Fuel 2. Remove oil fill cap/dipstick to add oil. DANGER  3. Using a funnel, add up to 18.6 fl. oz. (550 ml) of oil (included) and replace oil fill cap/dipstick.

  • Page 20: Grounding

    ASSEMbLY 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER 3. The approximate fuel level is shown on the fuel gauge on top NOTICE  of the fuel tank. The generator engine works well with 10% or less ethanol blended gasoline. When using ethanol-gasoline blends there...

  • Page 21: Operation

    OPERATION 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Neutral Bonded to Frame* WARNING  – Neutral circuit IS electrically connected to the frame/ground of During operation the muffler and exhaust fumes will become the generator. hot. If adequate cooling and breathing space are not supplied, –...

  • Page 22: Starting The Engine

    OPERATION 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Starting the Engine 3. Push and release the STOP $ button on the remote key fob. The START/STOP button will flash green once and the 1. Make certain the generator is on a flat, level surface.
  • Page 23 OPERATION 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER 3. Move the choke to the “CHOKE” position O or press the Electric Start choke button until illuminated green. DO NOT attempt to adjust the choke. The remote system will automatically close and open the choke.

  • Page 24: Battery

    OPERATION 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER battery 5. Once engine starts, move choke lever to the “RUN” position P or press the choke button until no longer illuminated green. NOTICE  When the START/STOP button is pushed to “STANDBY” mode, the button will flash green if the battery is sending out a charge.

  • Page 25: Do Not Overload Generator

    OPERATION 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Do Not Overload Generator NOTICE  Capacity Never exceed the specified capacity when adding loads to the Follow these simple steps to calculate the running and starting generator. watts necessary for your purposes: 1.

  • Page 26: Parallel Operation

    (START/STOP button flashing green). Parallel Operation The generator will stay in standby mode for 12 hours if shut The Champion model 200953 is parallel ready and can be down using the Remote Control. operated in parallel with another Champion unit to increase the To turn standby mode off manually, push and hold the “STOP”...

  • Page 27: Moving The Generator

    OPERATION 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER 3. Press the START/STOP button. 3. While maintaining balance, roll the generator to the desired location. 4. Turn the fuel valve to the “OFF” position. – NEVER tilt sideways while moving the generator.

  • Page 28: Maintenance

    MAINTENANCE 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER To prevent accidental starting, remove and ground the spark plug WARNING  wire before performing any service. Operation using the alternative main jet at elevations lower than the recommended minimum altitude can damage the Changing the Engine Oil engine.

  • Page 29: Cleaning The Air Filter

    MAINTENANCE 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER 3. Inspect the electrode on the plug. It must be clean and not 4. Carefully remove the carbon deposits from the spark arrestor worn to produce the spark required for ignition.

  • Page 30: Generator Battery

    MAINTENANCE 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Generator battery Remote Control battery Your generator is equipped with an automatic battery charging NOTICE  circuit that charges the battery while the engine is running. The battery will maintain a proper charge if the unit is used on –...

  • Page 31: Storage

    STORAGE 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER 5c. Use the drain bolt on the carburetor to empty any EVERY 3 YEARS excess gasoline from the carburetor into an appropriate — Replace fuel line* container. Use a funnel (and appropriate hose if necessary) under the carburetor drain bolt to avoid spillage.

  • Page 32: Removing From Storage

    STORAGE 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER 4. When gasoline stops flowing from the carburetor, replace and tighten the carburetor drain bolt and be sure to properly dispose of the drained gasoline according to local regulations or guidelines.

  • Page 33: Specifications

    SPECIFICATIONS 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER SPECIFICATIONS Oil Specifications DO NOT OVERFILL. Generator Specifications Type ..........*See following chart Generator Model ......... ..

  • Page 34: Troubleshooting

    TROUbLESHOOTING 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER TROUbLESHOOTING Problem Cause Solution No fuel. Add fuel. Faulty spark plug. Clean and adjust spark plug or replace. Fill crankcase to the proper level. Low oil level. Place generator on a flat, level surface.
  • Page 35 TROUbLESHOOTING 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER Problem Cause Solution Engine governor defective. Contact the help line. Dirty fuel valve. Clean the fuel valve. Engine hunts or falters. Carburetor is dirty and running lean. Contact the help line.

  • Page 36: Warranty

    WARRANTY 200953 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER WARRANTY* Other Exclusions This warranty excludes: CHAMPION POWER EQUIPMENT – Cosmetic defects such as paint, decals, etc. 3 YEAR LIMITED WARRANTY – Wear items such as filter elements, o-rings, etc.
  • Page 37 CHAMPION POWER EQUIPMENT, INC. (CPE), THE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY (U.S. EPA) AND THE CALIFORNIA AIR RESOURCES BOARD (CARB) EMISSION CONTROL SYSTEM WARRANTY Your Champion Power Equipment (CPE) engine complies with both the U.S. EPA and state of California Air Resources Board (CARB) Exhaust and Evaporative emissions regulations.
  • Page 38 EXHAUST AND EVAPORATIVE EMISSION CONTROL SYSTEM WARRANTY The following are specific provisions relative to your Exhaust and Evaporative Emission Control System (ECS) Warranty Coverage. 1. APPLICABILITY: This warranty shall apply to 1995 and later model year California small off-road engines (SORE) (for other states, 1997 and later model year engines).
  • Page 39 EMISSION-RELATED PARTS INCLUDE THE FOLLOWING: (using those portions of the list applicable to the engine) Systems covered by this Parts Description warranty Fuel Metering System Carburetor and internal parts (and/or pressure regulator or fuel injection system), Air/fuel ratio feedback and control system, Cold start enrichment system. Air Induction System Controlled hot air intake system, Intake manifold, Air filter.

Table of Contents