Upgrading Your Machine's Software - Brother 885-V35/V37 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX

Upgrading Your Machine's Software

You can use a computer to download software upgrades for your sewing machine.
Visit our website at "http://solutions.brother.com" for notification of available updates.
Note
Be sure to download the upgrade file for this model from our web site. An upgrade file for any different
model cannot be downloaded.
Refer to the "Changing the machine settings" (page 18) for how to check the version of the sewing
machine's software.
Memo
The embroidery pattern which is saved in the sewing machine will not be deleted if you upgrade the
software.
While the software is being upgraded, the buzzer will not sound when a key is pressed.
a While holding
turn on the machine.
The following screen appears.
b Plug the USB cable connectors into the
corresponding USB ports on the computer and
on the machine.
The "Removable Disk" icon appears in "My
Computer" on the computer.
c Copy the upgrade file to "Removable Disk".
The message "Connected to PC. Do not
disconnect the USB cable." appears.
186
(Settings key) pressed, d When the screen shown in step
again, press
The message "Saving the upgrade file. Do
not turn main power to OFF." appears.
e When the following screen appears, upgrading
is completed.
Note
If an error occurred, an error message
appears. At this time, turn the machine off,
and then start the procedure again from step
a
.
f Disconnect the USB cable, and turn the
machine off, then on again.
a
appears
.