Embroidery Step By Step - Brother 885-V35/V37 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Embroidery step by step

The basic steps for embroidery are as follows.
1 Presser foot attachment
2 Checking the needle
3 Embroidery unit attachment
4 Bobbin thread setup
5 Fabric preparation
Embroidery frame
6
attachment
Pattern selection
7
8 Checking the layout
Embroidery thread setup
9
Attach the embroidery foot "Q".
For details on attaching the embroidery foot, refer to "Attaching the
embroidery foot" (page 138).
↓
Use a needle matched to the fabric.
For details on replacing the needle, refer to "Replacing the needle" (page
41).
↓
Attach the embroidery unit.
For details on attaching the embroidery unit, refer to "Attaching the
embroidery unit" (page 141).
↓
For the bobbin thread, wind embroidery bobbin thread and set it in
place.
For details on setting up the bobbin thread, refer to "Winding/Installing
the Bobbin" (page 22).
↓
Attach a stabilizer material to the fabric, and hoop it in an embroidery
frame.
For details on preparing the fabric, refer to "Preparing the Fabric" (page
144).
↓
Attach the embroidery frame to the embroidery unit.
For details on attaching the embroidery frame, refer to "Attaching the
Embroidery Frame" (page 148).
↓
Turn the power on, and select an embroidery pattern.
For details on selecting embroidery patterns, refer to "Selecting
Embroidery Patterns" (page 150).
↓
Check and adjust the size and position of the embroidery.
For details on adjusting the layout and the size, refer to "Adjusting the
layout and the size" (page 161).
↓
Set up embroidery thread according to the pattern.
For details on setting up the thread, refer to "Upper Threading" (page 31).
Embroidering Neatly 137
4