Removing The Embroidery Unit - Brother 885-V35/V37 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Removing the embroidery unit

Make sure that the sewing machine is completely
stopped and follow the instructions below.
a Remove the embroidery frame.
• For details on removing the embroidery
frame, refer to "Removing the embroidery
frame" (page 149).
b Press
The embroidery carriage moves into a
position where it can be saved.
Note
If this step is skipped, the carriage will not
move into a correct position; you cannot
put the embroidery cover on the embroidery
unit.
c Turn off the sewing machine.
CAUTION
● Always turn off the sewing machine
before removing the embroidery unit. It
may cause malfunctions if removed when
the machine is turned on.
, and then press .
d Hold the release button on the bottom left of
the embroidery unit, and slowly pull the
embroidery unit to the left.
a Release button
The embroidery unit separates from the
sewing machine.
CAUTION
● Do not carry the embroidery unit by
holding the carriage. It may cause
malfunctions.
Attaching the Embroidery Unit 143
a
4