— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
Changing the length for satin
stitches
The length for one satin stitch can be changed in five
gradations.
a
Press
(Utility stitch key) on the
operation panel, and then select
stitch).
b
Select a satin stitch pattern.
c
Press
.
It turns to
and the pattern becomes
longer.
Each time you press it, the number changes.
You can select from
124
(Satin
-
.
Adjusting the character spacing
The space between alphanumeric characters can be
adjusted.
a
Press
(Utility stitch key) on the
operation panel, and then select characters.
b
Press
(Setting key).
c
Press
for character spacing.
Press
to increase the character spacing.
Press
to decrease the character spacing.
Memo
The default setting is "00". The number less
than "00" cannot be set.
The result of adjusting the character spacing
is valid for all characters. The result is valid
not only while entering characters, but also
before and after entering characters.